This week at NAB in Vegas, RED will be showcasing an array of innovations and new products. Be sure to stop by their booth, #SL1519 to see live demos or new products and software – including the lovelies we have for consideration today.
RED have some new and updated cameras on offer and a few other goodies. We’ll be looking at each of them in detail below (in this order):
- RED® 4K Broadcast Module – Real-time streaming of live uncompressed 4K footage at 60 fps
- SCARLET-X® RED DRAGON® – Now in 6K and available for order
- REDLINK™ Development Kit – REDLINK™ SDK that gives you the power to create remote control apps for the DSMC
- EPIC-M DRAGON® MONOCHROME – Exclusively a B&W camera capable of capturing 6K images at 1-100 fps
And, if this lot isn’t enough to completely drain your budget, head on over to Band-Pro’s booth and check out the Leica Summicron-C Primes they’re demonstrating all week. Then go home and either put a mortgage on your home, or cry for a while. Never fear, we’ll have plenty more shiny things to show you all week long. So Stay Tuned!
New 4K Broadcast Module
4K Broadcast Module
ESTIMATED TO BEGIN SHIPPING BY FALL 2014.
The RED® 4K Broadcast Module allows for live 4K streaming, enabling you to capture and view action in real-time. Compatible with both EPIC DRAGON and SCARLET DRAGON cameras, the new 4K Broadcast Module uses four 3G-SDI output connections to broadcast 4K video at up to 60 frames per second. Five ¼-20 mounting holes are built into the top of the module, allowing for various mechanical peripherals to be attached.
The RED® 4K Broadcast Module requires either the MODULE ADAPTOR or the +1 ADAPTOR MODULE be connected to the BRAIN. Only power/battery modules or the REDmote can be attached to the rear of the module.
Specs:
| Mount Type | Mounts to: +1 ADAPTOR MODULE ADAPTOR MODULE |
| Output Connector | 4x 3G-SDI (BNC) output connectors 1x Genlock/Sync (75 ohm BNC) input connector 1x Timecode (75 ohm BNC) input connector |
| Dimensions | Height: 4.29″ (109 mm) Width: 5.08″ (129 mm) Depth: 2.25″ (57.2 mm) |
| Material | Aluminum |
| Construction | Machined |
| Coating | Black powder coat |
| Reliability/Environmental | |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | –5°C to 60°C (–20°F to 140°F) |
| Operating Humidity Range | 0% to 85%, non-condensing |
| Storage Humidity Range | 0% to 85%, non-condensing |
Tech specs reflect both current and projected information. Everything is subject to change.
Price: $6,950.00 (USD)
More Info: http://www.red.com/red-4k-broadcast-module
Scarlet-X RED Dragon
6K for SCARLET is here. Not just an upgrade anymore, SCARLET-X DRAGON combines the versatility of SCARLET with the unrivaled power of the RED DRAGON sensor. SCARLET-X DRAGON is a completely flexible device, utilizing HDRx and interchangeable lens mounts so you don’t have to replace your existing lens collection. Shoot motion video and stills images at 6K resolution from 1-12 frames per second, or up to 48 frames per second at 5K. When you shoot with this camera you are also capturing over 9x more pixels than HD for superior motion capture. With the convergence of cinema and photography, SCARLET provides all the tools necessary for filmmakers and photographers alike.
The SCARLET-X DRAGON w/ SIDE SSD MODULE AND LENS MOUNT is the perfect camera package designed to combine versatility and portability with the unrivaled power of the 19 megapixel RED DRAGON sensor. Capture motion video and still images at 6K resolution from 1-12 frames per second, or up to 30 frames per second at 5K. Its 16.5+ stops of dynamic range give the SCARLET DRAGON the advantage in challenging lighting, while its durable aluminum body ensures that the DSMC holds up in extreme shooting conditions.
With the improved RED DRAGON sensor and an arsenal of configurable mounts and modules to support it, the SCARLET-X® RED DRAGON® is the perfect camera for cinematographers and photographers alike.
Price: $18,000.00 (USD) w/ PL Mount
More Info: www.red.com/scarlet-dragon-side-ssd-lens-mount
Redlink Development Kit
RedLink Bridge
ESTIMATED TO BEGIN SHIPPING BY APRIL 11, 2014.
The REDLINK™ Development Kit allows programmers to create custom applications to control their DSMC via mobile device, computer, or microcontroller. The kit contains a USB pre-loaded with the REDLINK SDK sample apps, as well as additional resources. Use the SDK, apps, and resources to create custom applications that allow you to adjust controls on the DSMC, including Record Start/Stop, Shutter Speed, White Balance, ISO, and programmable User Keys. You can also program your custom app to monitor the status of your camera settings.
Completing the REDLINK™ Development Kit is the REDLINK™ Bridge, a wireless module that allows apps to communicate with the DSMC through the REDLINK™ Command Protocol (RCP). Additionally, the REDLINK™ Bridge interfaces with the RED 3-AXIS LENS CONTROL SYSTEM’s T.H.C. (TACTICAL HAND CONTROLLER) to control focus and iris on Canon and Nikon lenses. The REDLINK™ Bridge attaches to the rear of the DSMC brain or compatible rear module, and supports a wireless communication range of approximately 50 ft.
Note: The REDLINK™ Bridge requires that the DSMC is on firmware v5.2.8 or later.
Specs:
| Wireless Standard1 | 802.11/b/g/n |
| Wireless Range2 | Approximately 50 feet |
| Data Rates | 1 Mbps to 72 Mbps |
| Network Modes3 | Ad-Hoc mode Infrastructure mode |
| Network Security | WEP |
| Network Channels | Channel 1 to Channel 11 (when connecting to a device) Channel 1 to Channel 42 (when connecting to T.H.C.) |
| Output Connector | 1x 0B 6-pin LEMO auxiliary connector |
| Dimensions | Height (w/ antenna): 5.17″ (13.1 cm) Height (w/o antenna): 4.32″ (11 cm) Width: 2.95″ (7.5 cm) Depth: 1.06″ (2.7 cm) |
| Weight | 0.477 lbs (216 g) |
| Material | Aluminum |
| Construction | Machined |
| Coating | Black anodized coating |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | –5°C to 60°C (–20°F to 140°F) |
| Operating Humidity Range | 0% to 85%, non-condensing |
| Storage Humidity Range | 0% to 85%, non-condensing |
| Typical Operating Power Dissipation | 220 mA |
| Peak Operating Power Dissipation | 300 mA |
1The REDLINK Bridge is not a wireless access point.
2As with all wireless devices, the communication range may be affected by the environment and any radio frequency (RF) interference that may be present.
3Ad-Hoc and infrastructure modes cannot be used at the same time.
Price: $395.00 (USD)
More Info: www.red.com/redlink-development-kit
EPIC-M DRAGON MONOCHROME
Epic-M Monochrome with TI Nikon Mount
EPIC-M DRAGON® MONOCHROME takes the unparalleled DRAGON sensor, capable of capturing 6K images at 1-100 fps, and churns out exceptionally crisp B&W video and stills. Exclusively a B&W camera, EPIC-M DRAGON MONOCHROME utilizes its unique sensor pattern to achieve optimum resolution and extended dynamic range. EPIC-M DRAGON MONOCHROME also takes advantage of greater light sensitivity and tonal transfer in gradients, far exceeding the monochrome quality of a color image converted to black and white.
DSMC modules, sensor upgrades and free firmware updates are just a few advantages of DRAGON as a monochrome camera, ensuring Obsolescence Obsolete.
Specs:
| Pixel Array | 6144 (h) x 3160 (v) |
| S/N Ratio | 80db |
| Dynamic Range | 16.5+ stops |
| Max Image Area | 6144 (h) x 3160 (v) |
| Lens Coverage | 30.7mm (h) x 15.8mm (v) x 34.5 mm (d) |
| Acquisition Formats | 6K RAW (2:1, 2.4:1) 5K RAW (Full Frame, 2:1, 2.4:1 and Anamorphic 2:1) 4.5K RAW (2.4:1) 4K RAW (16:9, HD, 2:1 and Anamorphic 2:1) 3K RAW (16:9, 2:1 and Anamorphic 2:1) 2K RAW (16:9, 2:1 and Anamorphic 2:1) 1080p RGB (16:9)720p RGB (16:9) |
| Project Frame Rates | 23.98, 24, 25, 29.97, 47.96, 48, 50, 59.94 fps, all resolutions |
| Delivery Formats1 | 4K: DPX, TIFF, OpenEXR (RED RAY via optional encoder) 2K: DPX, TIFF, OpenEXR (RED RAY via optional encoder) 1080p RGB 4:2:2, 720p 4:2:2 : Quicktime, JPEG, Avid AAF, MXF 1080p 4.2.0, 720p 4:2:0 : H.264, .MP4 |
| Program Output | HD-SDI Clean Feed 2K RGB, 1080p RGB or 4:2:2, 720p 4:2:2 SMPTE Timecode, HANC Metadata, 24-bit 48Khz Audio |
| Monitor Output | HD-SDI and HDMI with Frame Guides and Lookaround 2K RGB, 1080p RGB or 4:2:2, 720p RGB or 4:2:2 SMPTE Timecode, HANC Metadata, 24-bit 48Khz Audio |
| Digital Media | REDMAG 1.8″ SSD: 48GB, 64GB, 128GB, 240GB, 256GB, 512GB RED MINI-MAG: 512GB |
| REDCODE™ | To see all of the maximum available REDCODE values, see the DSMC Media Operation Guide at www.red.com/downloads |
| Audio | 2 channel, uncompressed, 24 bit, 48KHz. Optional 4 channel, and AES/EBU digital audio. |
| Monitoring Options | RED TOUCH 5.0″ LCD RED PRO 7″ LCD RED TOUCH 9.0″ LCD BOMB EVF (LCOS) RED BOMB EVF (OLED) |
| Remote Control | REDLINK Wireless, Ethernet, RS232, GPI Trigger |
| Weight | 5lbs. Body only |
| Construction | Aluminum Alloy |
| Operating Temperature Range | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature Range | –20°C to 50˚°C (–4°F to 122°F) |
Price: $35,200 (USD)
More Info: www.red.com/sepic-dragon-monochrome
